- Poster presentation
- Open access
- Published:
Sample size requirements for pilot randomised controlled trials with continuous outcomes: a simulation study
Trials volume 14, Article number: P46 (2013)
Aims
There is lack of consensus over what sample size should be used for external pilot trials to inform the design of definitive parallel group superiority randomised controlled trial (RCT). The aim of this research was to investigate the sample size required to precisely estimate the key parameter associated with a continuous outcome, the standard deviation (SD).
Methods
We use a simulation approach to examine the sampling distribution of the SD for a Normally distributed outcome. We assessed the precision of the estimates by calculating the relative gain in precision through the width of the 95% confidence interval (CI) and the percentage gain in precision per increase in sample size of 5 in each group.
Results
The bias in the pooled SD estimate is negligible once the total pilot sample is 60 or above and the relative gain in precision (for each ten subjects added to the pilot) drops to below 10% once the total sample size is 70. When planning the full RCT for a continuous outcome, estimates generated by pilot samples of 70 will have the required power with close to 50% confidence when the true standardised effect size is above 0.2. Adjusting the required sample sizes for the full RCT to deliver the required power with 80% confidence can result in excessively large full planned RCTs.
Conclusions
We recommend that an external pilot study needs at least a total of 70 measured subjects (35 per group) to estimate the pooled SD for a continuous outcome.
Author information
Authors and Affiliations
Rights and permissions
Open Access This article is published under license to BioMed Central Ltd. This is an Open Access article is distributed under the terms of the Creative Commons Attribution License ( https://creativecommons.org/licenses/by/2.0 ), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly credited. The Creative Commons Public Domain Dedication waiver ( https://creativecommons.org/publicdomain/zero/1.0/ ) applies to the data made available in this article, unless otherwise stated.
About this article
Cite this article
Teare, M., Hayman, A., Dimairo, M. et al. Sample size requirements for pilot randomised controlled trials with continuous outcomes: a simulation study. Trials 14 (Suppl 1), P46 (2013). https://doi.org/10.1186/1745-6215-14-S1-P46
Published:
DOI: https://doi.org/10.1186/1745-6215-14-S1-P46